Grip Supplies

Umbrella/Stand mount with Coldshoe Speedlight mount. This Bracket has a 5/8” socket for stand mounting and an 8mm hole to insert your umbrella. It ...

This is a 34”, 3 section Single articulated arm with 5/8” studs on each end. The arm can be configured in almost any direction using the main cente...

This is a 24”, 2 section Single articulated arm with 5/8” studs on each end. The arm can be configured in almost any direction using the main cente...

This is a 33”, 3 section Single articulated arm with 5/8” studs on each end. The arm can be configured in almost any direction using the main cente...

This is a 24” 2 section Single articulated arm with 5/8” studs on each end. The arm can be configured in almost any direction using the main center...

This 22” Flex arm has a 18mm diameter with brass studs on each end. One end has a 5/8” Hex stud with a female threaded 3/8” female mount. The other...

Affordable Grip Head with extended knobs can be mounted on a stand or grip arm. The holes in the twin grip heads are used to mount arms, studs, and...

Affordable Grip Head with extended knobs can be mounted on a stand or grip arm. The holes in the twin grip heads are used to mount arms, studs, and...

This Grip Head can be mounted on a stand or grip arm. The holes in the twin grip heads are used to mount arms, studs, and other accessories onto li...

This Grip Head can be mounted on a stand with its 5/8" socket. The holes in the grip head are used to mount arms, studs, and other accessories onto...

This Grip Head can be mounted on a stand with its 5/8" socket. The holes in the grip head are used to mount arms, studs, and other accessories onto...

This Super Clamp with a Multi Clamp attached gives you the option of attaching many useful accessories to your clamp. By using the attached Multi c...

The Super Clamp is one of the most useful accessories for your kit bag. This Twin Super Clamp extends the mounting capabilities of the Super Clamp....

The Super Clamp is one of the most useful accessories for your kit bag. The 5/8” Socket and padded jaws allow placement of accessories and lights a...

The Super Clamp is one of the most useful accessories for your kit bag. The 5/8" Socket and padded jaws allow placement of accessories and lights a...

The Twin Clamp can be used to hold Flags or Gels in front of lights or to place gobos on your set. A very useful accessory for small product work.

This Spring clamp with Coldshoe and 5/8” stud and 5/8” socket gives you the freedom to attach lights and accessories in convenient or unusual place...

This Spring clamp with Mini Ball Head and 5/8” stud gives you the freedom to attach lights and accessories in convenient or unusual places. The jaw...

Attach to edge of cheese plate for adapting 15mm rods.

Multi-purpose mounting plate with a quantity of ¼"-20 and 3/8"-16 threading holes, allowing the mounting all types of peripherals including, articu...

This pole clamp is used on lighting grids and railings to mount accessories. The attached 2 ½ “ geared grip head holds grip arms, studs for light m...

These screw clamps have stainless steel locking threads for strength and durability. The clamps also have 1/4x20 and 3/8” female mounting points. T...

3” Spring clamp with 1 1/2” pipe clamp parallel to clamp.  The 3” jaws have rubber protective covers and will open to 2”.  The 3” jaws have rubber ...

3” Spring Clamp with 5/8” stud and ¼” x 20 male thread.  The 3” jaws have rubber protective covers and will open to 2”.

This Spring clamp with 5/8” socket and stud gives you the freedom to attach lights and accessories in convenient or unusual places. The jaws are pr...

This Heavy Duty pipe clamp with safety cable is used to attach lights on to light grids and other pipe for secure and adjustable mounting. 

This is a very heavy duty adjustable clamp. The spring loaded padded jaws will mount most anywhere and can be tightened using the large round knob ...

The Spring loaded Adjustable clamp with 3 mounting points and stud adapters give you the option of accessory mounting almost anywhere. The strong a...

This 2” wide padded Jaw clamp can be attached to beams, tables, pipes, etc. Each Jaw Clamp includes a 5/8” stud to mount accessories. The bold thre...

This 4 ½” Grip head with a Junior Stud and receiver is designed to convert a Junior Stand into an overhead stand. It will allow the use of Junior a...

This 4 ½” Grip head with a Junior Stud and receiver is designed to convert a Junior Stand into an overhead stand. It will allow the use of Junior a...

Wall plates are a great way to place a light head or any other accessory almost anywhere. Clamp or screw them (using the pre-drilled holes) to most...

Wall plates are a great way to place a light head or any other accessory almost anywhere. Clamp or screw them (using the pre-drilled holes) to most...

Wall plates are a great way to place a light head or any other accessory almost anywhere. Clamp or screw them (using the pre-drilled holes) to most...

Wall plates are a great way to place a light head or any other accessory almost anywhere. Clamp or screw them (using the pre-drilled holes) to most...

Wall plates are a great way to place a light head or any other accessory almost anywhere. Clamp or screw them (using the pre-drilled holes) to most...

Designed to mount accessories which have a 1/4x20 threaded female receptacle to cameras, brackets, etc., which have a standard accessory shoe. All ...

This unique accessory is used to attach a ball head or tripod head to a 5/8” female socket. With this you can place your camera almost anywhere you...

A useful accessory with a 5/8” socket and 3/8” threaded stud on top. With this accessory you can mount a light or accessory on it and attach to a l...

A useful accessory with a 5/8” socket and ¼ x 20 threaded stud on top. With this accessory you can mount a light or accessory on it and attach to a...

This is a 1 1/8” Stud with a 5/8” female socket and threaded Female on top to allow mounting lighting with adjustable yokes on to stands and light ...

This is a 1 1/8” Stud with a 5/8” female socket and threaded stud on top to allow mounting lighting with adjustable yokes on to stands and light gr...

This 5/8” and 1 1/8” stud allows you to place a Baby Pin (5/8”) into a Junior Receiver (1 1/8”). Gives you more versatility for your Junior stands ...

This flat, round adapter provides a way to change from Male 5/8” stud on both ends.

This flat, round adapter provides a way to change from Male 3/8” to Male ¼ x 20  and still provide a wide stable base for accessories.

This flat, round adapter provides a way to change from Male ¼ x 20 to Male 3/8” and still provide a wide stabile base for accessories.

This Female ¼ x 20 and 5/8” stud is 5.7” long. With this extension stud, lights and accessories can be moved away from their mounting points to cle...

This Twin hex stud fits into Superclamps to give you more mounting options for your accessories. It can be used to mount 2 Superclamps together for...