DeoxIT D Series Spray, 100% Solution, 57g.
DeoxIT® D-Series – Contact Cleaner & Rejuvenator
Part No. D100S-2:
100% Spray, No solvents
Applicator: Spray, provides NO flushing action, applies 100% DeoxIT® using a metered one-shot valve.
Formulation: 20% DeoxIT® (active ingredient), 80% propellant
Use: When solvents are not required or materials are sensitive to any solvents. No flushing action. Spray provides application of DeoxIT® on connectors and components that are not easily accessible.
Notes: Use when over spray is an issue and on sensitive materials. Formulation safe on plastics. On easily accessible surfaces, recommend wiping off excess, leaving a thin layer.
More than a Contact Cleaner . . . Improves & Protects Connections!
DeoxIT® D-Series contact cleaner is a fast-acting deoxidizing solution that cleans, protects, lubricates and improves conductivity on all metal connectors and contacts.
Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface.
For reference, DeoxIT® has approximately 20% cleaning action.
- Improves Conductivity
- Deoxidizes, Cleans and Preserves
- Reduces Intermittent Connections
- Reduces Arcing & RFI
- Reduces Wear & Abrasion
- Temperature Range, -34 C (-29 F) to +200 C (400 F)
NOTE: THIS PRODUCT CAN NOT SHIP BY AIR - UPS GROUND ONLY
We Also Recommend
Professional Tape Head Cleaning Fluid
Carbon Dioxide Gas Duster - with 3 each 16 gram CO2 cartridges