New Products

Not to be confused with low cost version, this is super-strong professional quality clamp designed for stage, film, & broadcast production.  Co...

Not to be confused with low cost version, this is super-strong professional quality clamp designed for stage, film, & broadcast production.  No...

Not to be confused with low cost version, this is super-strong professional quality clamp designed for stage, film, & broadcast production.  No...

Professional Swiveling "C" Clamp Grip Adapter

Special clamp with pin designed to hold foamcore material

Three Hook Set for Paper Drive Set 2 - Super clamps for ease of mounting to pipes, stands, etc.

Steel safety cable is 41” long and 5mm thick. Its load capacity is 88 lb. (40 kg) and includes a carabiner type clip to secure overhead fixtures to...

Steel safety cable is 32” long and 3mm thick. Its load capacity is 44 lb. (20 kg) and includes a carabiner type clip to secure overhead fixtures to...

Steel safety cable is 32” long and 1.5mm thick. Its load capacity is 22 lb. (10 kg) and includes a carabiner type clip to secure overhead fixtures ...

Steel safety cable is 18” long and 1.5 mm thick. Its load capacity is 22 lbs (10 kg) and includes a carabiner type clip to secure overhead fixtures...

The Baby Drop Down mounts on a 5/8” stud or on a stand with a baby pin and gives you more freedom in directing and placing your lights and accessor...

This is a parallel twin coupler that is used to hold 2 sections of up to 2” pipe together. Use these couplers when assembling light grids and rails.

Couplers like this are used to mount lights and other accessories on pipe grids and railings. These couplers can be used on up to 2” pipes and crea...

Couplers like this are used to mount lights and other accessories on pipe grids and railings. These couplers can be used on up to 2” pipes and crea...

The adjustable mini clamp will work in areas that a full sized clamp won’t. The threaded female 1/4x20 and 3/8” mounting points help you to place y...

This Grip Head can be mounted on a stand or grip arm. The holes in the twin grip heads are used to mount arms, studs, and other accessories onto li...

Not to be confused with low cost version, this is super-strong professional quality clamp designed for stage, film, & broadcast production.  Co...

Not to be confused with low cost version, this is super-strong professional quality clamp designed for stage, film, & broadcast production.  Co...

Not to be confused with low cost version, this is super-strong professional quality clamp designed for stage, film, & broadcast production.  Co...

This coupler can be used to mount lights and other accessories on pipe girds up to 2” diameter and creates an extremely strong mount point. Coupler...

This coupler can be used on up to mount lights and other accessories on pipe girds up to 2” diameter and creates an extremely strong mount point. C...

Umbrella/Stand mount with Coldshoe Speedlight mount. This Bracket has a 5/8” socket for stand mounting and an 8mm hole to insert your umbrella. It ...

This is a 34”, 3 section Single articulated arm with 5/8” studs on each end. The arm can be configured in almost any direction using the main cente...

This is a 24”, 2 section Single articulated arm with 5/8” studs on each end. The arm can be configured in almost any direction using the main cente...

This is a 33”, 3 section Single articulated arm with 5/8” studs on each end. The arm can be configured in almost any direction using the main cente...

This is a 24” 2 section Single articulated arm with 5/8” studs on each end. The arm can be configured in almost any direction using the main center...

This 22” Flex arm has a 18mm diameter with brass studs on each end. One end has a 5/8” Hex stud with a female threaded 3/8” female mount. The other...

This 22” Flex arm has a 13mm diameter with brass studs on each end. One end has a 5/8” Hex stud with a female threaded 3/8” female mount. The other...

11" inch articulating friction arm with stainless steel is extremely handy for mounting all types of accessories. The arms have two nicely machined...

7" inch articulating friction arm with stainless steel is extremely handy for mounting all types of accessories. The arms have two nicely machined ...

Affordable Grip Head with extended knobs can be mounted on a stand or grip arm. The holes in the twin grip heads are used to mount arms, studs, and...

Affordable Grip Head with extended knobs can be mounted on a stand or grip arm. The holes in the twin grip heads are used to mount arms, studs, and...

This Grip Head can be mounted on a stand or grip arm. The holes in the twin grip heads are used to mount arms, studs, and other accessories onto li...

This Grip Head can be mounted on a stand with its 5/8" socket. The holes in the grip head are used to mount arms, studs, and other accessories onto...

This Grip Head can be mounted on a stand with its 5/8" socket. The holes in the grip head are used to mount arms, studs, and other accessories onto...

This Super Clamp with a Multi Clamp attached gives you the option of attaching many useful accessories to your clamp. By using the attached Multi c...

This Super Clamp with a Multi Clamp attached gives you the option of attaching many useful accessories to your clamp. By using the attached Multi c...

The Super Clamp is one of the most useful accessories for your kit bag. This Twin Super Clamp extends the mounting capabilities of the Super Clamp....

The Super Clamp is one of the most useful accessories for your kit bag. The 5/8” Socket and padded jaws allow placement of accessories and lights a...

The Super Clamp is one of the most useful accessories for your kit bag. The 5/8" Socket and padded jaws allow placement of accessories and lights a...

The Twin Clamp can be used to hold Flags or Gels in front of lights or to place gobos on your set. A very useful accessory for small product work.

This Spring clamp with Coldshoe and 5/8” stud and 5/8” socket gives you the freedom to attach lights and accessories in convenient or unusual place...

This Spring clamp with Mini Ball Head and 5/8” stud gives you the freedom to attach lights and accessories in convenient or unusual places. The jaw...

Attach to edge of cheese plate for adapting 15mm rods.

Multi-purpose mounting plate with a quantity of ¼"-20 and 3/8"-16 threading holes, allowing the mounting all types of peripherals including, articu...

This pole clamp is used on lighting grids and railings to mount accessories. The attached 2 ½ “ geared grip head holds grip arms, studs for light m...