GTX Grip

Steel safety cable is 32” long and 1.5mm thick. Its load capacity is 22 lb. (10 kg) and includes a carabiner type clip to secure overhead fixtures ...

The Baby Drop Down mounts on a 5/8” stud or on a stand with a baby pin and gives you more freedom in directing and placing your lights and accessor...

This is a parallel twin coupler that is used to hold 2 sections of up to 2” pipe together. Use these couplers when assembling light grids and rails.

Couplers like this are used to mount lights and other accessories on pipe grids and railings. These couplers can be used on up to 2” pipes and crea...

Couplers like this are used to mount lights and other accessories on pipe grids and railings. These couplers can be used on up to 2” pipes and crea...

This is a 24”, 2 section Single articulated arm with 5/8” studs on each end. The arm can be configured in almost any direction using the main cente...

7 inch articulating friction arm is extremely handy for mounting all types of accessories. The arms have two nicely machined metal sections. Just o...

Use the 5/8” socket to mount this bracket to a stand or clamp and it provides a camera mounting platform with tripod mounting screw, 1/4 x 20 thread.

Mount this extension bar into any super clamp and it provides a 5/8” stud to mount lights or other accessories. The extended mounting allows more c...

Wall plates are a great way to place a light head or any other accessory almost anywhere. Clamp or screw them (using the pre-drilled holes) to most...

This unique accessory is used to attach a ball head or tripod head to a 5/8” female socket. With this you can place your camera almost anywhere you...

A useful accessory with a 5/8” socket and ¼ x 20 threaded stud on top. With this accessory you can mount a light or accessory on it and attach to a...

This is a 1 1/8” Stud with a 5/8” female socket and threaded Female on top to allow mounting lighting with adjustable yokes on to stands and light ...

This is a 1 1/8” Stud with a 5/8” female socket and threaded stud on top to allow mounting lighting with adjustable yokes on to stands and light gr...

This 5/8” and 1 1/8” stud allows you to place a Baby Pin (5/8”) into a Junior Receiver (1 1/8”). Gives you more versatility for your Junior stands ...

This flat, round adapter provides a way to change from Male 5/8” stud on both ends.

This flat, round adapter provides a way to change from Male ¼ x 20 to Male 3/8” and still provide a wide stabile base for accessories.

This Female ¼ x 20 and 5/8” stud is 5.7” long. With this extension stud, lights and accessories can be moved away from their mounting points to cle...

This Twin hex stud fits into Superclamps to give you more mounting options for your accessories. It can be used to mount 2 Superclamps together for...

This Steel Male 3/8” threaded and Hex stud fits into Superclamps to give you additional mounting options for your accessories.

This Steel Male 1/4 x 20 threaded and Male 3/8" threaded Hex stud fits into Superclamps to give you additional mounting options for your accessories. 

This steel 1/4" x 20 female to 3/8"-16 female threaded Hex stud fits into Super clamps to give you additional mounting options for your accessories. 

This Steel Female ¼ x 20 threaded and female 3/8” threaded stud fits into most clamps and stands to give you additional mounting options for your a...

This Steel Male ¼ x 20 Threaded stud with male 3/8” threaded stud is used with Light stands, Clamps and brackets to add accessories. Use with any o...

This Small adapter is used to go convert a Female 3/8 socket to a male 3/8 stud. It is a very useful accessory for tripods, rigs and light stands. ...

This Small adapter is used to convert a Female ¼ x 20 inch socket or a Female 3/8” socket to a male threaded stud. It is a very useful accessory fo...

This Small adapter is used in a Female ¼ x 20 inch socket to convert to a male ¼ x 20 stud. It is a very useful accessory for tripods, rigs and lig...

This Small adapter is used to convert a male ¼ x 20 inch stud to a male 3/8” stud. It is a very useful accessory for tripods, rigs and light stands...

This Small adapter is used to convert a male 3/8 inch stud to a male ¼ x 20 stud. It is a very useful accessory for tripods, rigs and light stands....

The Super Clamp is one of the most useful accessories for your kit bag. This Twin Super Clamp extends the mounting capabilities of the Super Clamp....

This Grip Head can be mounted on a stand or grip arm. The holes in the twin grip heads are used to mount arms, studs, and other accessories onto li...

Affordable Grip Head with extended knobs can be mounted on a stand or grip arm. The holes in the twin grip heads are used to mount arms, studs, and...

Affordable Grip Head with extended knobs can be mounted on a stand or grip arm. The holes in the twin grip heads are used to mount arms, studs, and...

The Super Clamp is one of the most useful accessories for your kit bag. The 5/8” Socket and padded jaws allow placement of accessories and lights a...

This Super Clamp with a Multi Clamp attached gives you the option of attaching many useful accessories to your clamp. By using the attached Multi c...

The Super Clamp is one of the most useful accessories for your kit bag. The 5/8" Socket and padded jaws allow placement of accessories and lights a...

This pole clamp is used on lighting grids and railings to mount accessories. The attached 2 ½ “ geared grip head holds grip arms, studs for light m...

Wall plates are a great way to place a light head or any other accessory almost anywhere. Clamp or screw them (using the pre-drilled holes) to most...

Wall plates are a great way to place a light head or any other accessory almost anywhere. Clamp or screw them (using the pre-drilled holes) to most...

7" inch articulating friction arm with stainless steel is extremely handy for mounting all types of accessories. The arms have two nicely machined ...

11" inch articulating friction arm with stainless steel is extremely handy for mounting all types of accessories. The arms have two nicely machined...

Wall plates are a great way to place a light head or any other accessory almost anywhere. Clamp or screw them (using the pre-drilled holes) to most...

Multi-purpose mounting plate with a quantity of ¼"-20 and 3/8"-16 threading holes, allowing the mounting all types of peripherals including, articu...

This Spring clamp with Mini Ball Head and 5/8” stud gives you the freedom to attach lights and accessories in convenient or unusual places. The jaw...

This Spring clamp with Coldshoe and 5/8” stud and 5/8” socket gives you the freedom to attach lights and accessories in convenient or unusual place...

This Spring clamp with 5/8” socket and stud gives you the freedom to attach lights and accessories in convenient or unusual places. The jaws are pr...

Counterweight can be used with any light stand or boom. Sandbag has two pocketswhich can be filled with sand or shot to produce the counterbalance ...