All

Basic 3" spring clip with hundreds of uses in the studio and on location.

Wall plates are a great way to place a light head or any other accessory almost anywhere. Clamp or screw them (using the pre-drilled holes) to most...

This coupler can be used to mount lights and other accessories on pipe girds up to 2” diameter and creates an extremely strong mount point. Coupler...

These screw clamps have stainless steel locking threads for strength and durability. The clamps also have 1/4x20 and 3/8” female mounting points. T...

3” Spring clamp with 1 1/2” pipe clamp right angle to clamp.  The 3” jaws have rubber protective covers and will open to 2”.  The 3” jaws have rubb...

3” Spring Clamp with 5/8” stud and ¼” x 20 male thread.  The 3” jaws have rubber protective covers and will open to 2”.

This pole clamp is used on lighting grids and railings to mount accessories. The attached 2 ½ “ grip head holds grip arms, studs for light mounting...

Wall plates are a great way to place a light head or any other accessory almost anywhere. Clamp or screw them (using the pre-drilled holes) to most...

This Super Clamp with a Multi Clamp attached gives you the option of attaching many useful accessories to your clamp. By using the attached Multi c...

Wall plates are a great way to place a light head or any other accessory almost anywhere. Clamp or screw them (using the pre-drilled holes) to most...

This 22” Flex arm has a 13mm diameter with brass studs on each end. One end has a 5/8” Hex stud with a female threaded 3/8” female mount. The other...

3” Spring Clamp with 5/8” stud and ¼” x 20 male thread.  The 3” jaws have rubber protective covers and will open to 2”.

This 2” wide padded Jaw clamp can be attached to beams, tables, pipes, etc. Each Jaw Clamp includes a 5/8” stud to mount accessories. The bold thre...

Professional Swiveling "C" Clamp Grip Adapter

Special clamp with pin designed to hold foamcore material

Three Hook Set for Paper Drive Set 2 - Super clamps for ease of mounting to pipes, stands, etc.

Steel safety cable is 41” long and 5mm thick. Its load capacity is 88 lb. (40 kg) and includes a carabiner type clip to secure overhead fixtures to...

Steel safety cable is 32” long and 3mm thick. Its load capacity is 44 lb. (20 kg) and includes a carabiner type clip to secure overhead fixtures to...

Steel safety cable is 32” long and 1.5mm thick. Its load capacity is 22 lb. (10 kg) and includes a carabiner type clip to secure overhead fixtures ...

Steel safety cable is 18” long and 1.5 mm thick. Its load capacity is 22 lbs (10 kg) and includes a carabiner type clip to secure overhead fixtures...

The Baby Drop Down mounts on a 5/8” stud or on a stand with a baby pin and gives you more freedom in directing and placing your lights and accessor...

This is a parallel twin coupler that is used to hold 2 sections of up to 2” pipe together. Use these couplers when assembling light grids and rails.

Couplers like this are used to mount lights and other accessories on pipe grids and railings. These couplers can be used on up to 2” pipes and crea...

Couplers like this are used to mount lights and other accessories on pipe grids and railings. These couplers can be used on up to 2” pipes and crea...

The adjustable mini clamp will work in areas that a full sized clamp won’t. The threaded female 1/4x20 and 3/8” mounting points help you to place y...

7 inch articulating friction arm is extremely handy for mounting all types of accessories. The arms have two nicely machined metal sections. Just o...

Locking Metal Foot with Post 1/4x20 Locking All Metal Standard Male Tripod Post with Female Flash Foot. Designed to mount accessories which have a ...

15MM ROD CLAMP W/1.4X20 THREAD This rod clamp slides over a standard rig 15mm rod, and allows you to attach an accessory which has a male 1/4x20 st...

13.5 inch articulating friction arm is extremely handy for mounting all types of accessories. The arms have two nicely machined metal sections. Ju...

12.5 inch articulating friction arm with stainless steel is extremely handy for mounting all types of accessories. The arms have two nicely machine...

7 inch articulating friction arm is extremely handy for mounting all types of accessories. The arms have two nicely machined metal sections. Just o...

Affordable Grip Head with extended knobs can be mounted on a stand or grip arm. The holes in the twin grip heads are used to mount arms, studs, and...

Affordable Grip Head with extended knobs can be mounted on a stand or grip arm. The holes in the twin grip heads are used to mount arms, studs, and...

This Grip Head can be mounted on a stand or grip arm. The holes in the twin grip heads are used to mount arms, studs, and other accessories onto li...

This Super Clamp with a Multi Clamp attached gives you the option of attaching many useful accessories to your clamp. By using the attached Multi c...

The Super Clamp is one of the most useful accessories for your kit bag. This Twin Super Clamp extends the mounting capabilities of the Super Clamp....

The Super Clamp is one of the most useful accessories for your kit bag. The 5/8” Socket and padded jaws allow placement of accessories and lights a...

The Super Clamp is one of the most useful accessories for your kit bag. The 5/8" Socket and padded jaws allow placement of accessories and lights a...

The Twin Clamp can be used to hold Flags or Gels in front of lights or to place gobos on your set. A very useful accessory for small product work.

These screw clamps have stainless steel locking threads for strength and durability. The clamps also have 1/4x20 and 3/8” female mounting points. T...

11" inch articulating friction arm with stainless steel is extremely handy for mounting all types of accessories. The arms have two nicely machined...

7" inch articulating friction arm with stainless steel is extremely handy for mounting all types of accessories. The arms have two nicely machined ...

Wall plates are a great way to place a light head or any other accessory almost anywhere. Clamp or screw them (using the pre-drilled holes) to most...

Wall plates are a great way to place a light head or any other accessory almost anywhere. Clamp or screw them (using the pre-drilled holes) to most...

Wall plates are a great way to place a light head or any other accessory almost anywhere. Clamp or screw them (using the pre-drilled holes) to most...

This pole clamp is used on lighting grids and railings to mount accessories. The attached 2 ½ “ geared grip head holds grip arms, studs for light m...