Stereo Audio Input Switcher with Headphone Amp - 4X1
The EZ-HSX4 is a stereo audio source selector with an output volume control. Line-level and headphone outputs are provided. This unit is ideal as a four input headphone amplifier and as a source selector feeding an associated audio amplifier. The EZ-HSX4 is used in stores, houses of worship, studios, sound booths, home component systems and commercial sound systems.
Features:
- Four Input Source Selection
- Unbalanced Stereo Audio Inputs and Output
- Inputs and Line Output on Rear-Panel RCA Jacks
- Line Output Switchable Fixed (Unity Gain) or Variable
- Variable Output Follows Front-Panel Level Control
- Headphone Output on 1/4" (6.3 mm) and MINI Jacks
- Headphone Output Follows Front-Panel Level Control
- Full-Size Interlocking Push buttons on Front Panel
Advantages:
- Easy-to-Push Large Buttons
- Solid-State Audio Switching
- Switch Noise Cannot Affect Signal Quality
SPECIFICATIONS:
Inputs (4): Stereo on dual RCA jacks, > 10 kΩ, -10 dBV nominal,
+10 dBV max.
Level control: Off to +12 dB gain
Outputs (3): Stereo on dual RCA jacks
(line level, -10 dBV nominal, +10 dBV max. fixed,
+17 dBV max. variable),
1/4” (6.3 mm) TRS or Mini jack (2 headphone, 35 mW, 100 Ω load)
Frequency Response: 10 Hz to 20 kHz (line output ±0.05 dB, headphone output ±1.25 dB, 100 Ω load)
THD+N: < 0.03% (line output), < 0.1% (headphone output, 10 mW,
100 Ω load)
Crosstalk: < -70 dB (1 kHz)
Noise: < -100 dB (headphone, below 10 mW output, 100 Ω load)
Noise: < -80 dB (variable output, below -10 dBV, unity gain),
< -95 dB (fixed output, below -10 dBV)
24 Vdc power supply current: 40 mA (idle), 50 mA (max.)
Case dimensions: 5.75” (14.6 cm)W x 5” (12.7 cm)D
Mounting size: 1/3 rack width
Package Type: Cardboard Box
Package Dimensions: 9.5 x 7 x 2.25 in.
Shipping Weight: 1.215 lbs.
WEEE weight: 0.825 lbs.
Tariff code: 8518.40.2000
We Also Recommend
