MPS1611P Powered Studio Monitor


  • $ 1,279.00

The MPS 1611P studio monitor feature a long stroke 6.5” driver and a low compression 1” dome tweeter to provide impressive sound impact for high resolution “sound productions”

The dual channel power amplifiers drive the bass-midrange and high frequency sections with great precision and full control of signal dynamics.

The MPS1611P can operate both as a sealed or a ported loudspeaker due to the removeable “port plug system” at the rear side of speaker.

When operating with subwoofer, the choice of sealed box configuration and filter set to “normal” will provide the classic M&K Sound sub/sat crossover configuration, while when using the MPS1611P as a stand-alone monitor, the ported configuration with filter set to “full-range” will extend bass response and provider precise “broad band” response for near field monitor applications.

MPS1611P is a flexible high precision studio monitor to use for reference recordings, editing, processing, and master mixing for music and movie productions.


Amplifier power bass-midrange: 100watt RMS/200watt peak
Amplifier power high frequency: 50watt RMS/100watt peak
Bass-midrange: 1 x 6,5” polypropylene woofer
High frequency drivers: 1 x 1” soft dome tweeter
Frequency response: Sealed/normal setting 80-22KHz +/-2dB
Frequency response:  Sealed/full range setting/
                                    (wall or console loaded) 45-22Khz +/-2dB
Frequency response: Ported/normal setting 45-22KHz +/-2dB
Frequency response:  Ported/full range setting/ (wall or console loaded)
                                    35-22Khz +/-2dB
Total Harmonic distortion:  < 0,025% into 8 ohms LF channel/                                                                           < 0.025% into 4 ohms HF channel
Signal to noise ratio: 100 dB
AC power consumption: Standby/Average/Max (15W, 30W, 240W)
AC line voltage: 115VAC/60Hz 2A – 230VAC/50Hz 1A
Input impedance. unbalanced 11kohm / balanced 22Kohm
Input sensitivity unbalanced: 100mV 88dB 1m / balanced 200mV 88dB 1m
Max output level: 106dB/100Hz
Max input:  24dBu balanced
High pass filter:  Fixed 80 Hz (24dB)
Dimensions HxWxD: 12.6 x 8.3 x 11.6” / 321 x 213 x 297 mm
Weight: 20.3 lbs / 9,2 kg
Finish:  Black satin


We Also Recommend