Skip to content

20 W Stereo Audio Amplifier - 8 Ω, with Power Supply

Save $ 60.95
Original price $ 219.95
Current price $ 159.00
SKU RDL-EZ-PA20

The EZ-MXA20 is a stereo mixer amplifier with one mic input and two line inputs. Bass and treble tone controls are included. An integral compressor/limiter allows a higher sound output level without clipping than is possible using a standard amplifier. The output drives 4 or 8 ohm speakers. The EZ-MXA20 is used in houses of worship, restaurants, clubs, meeting rooms and commercial sound systems.

Features:

  • Audio Amplifier with Mic and Line Input Mixer
  • 10 Watts RMS Per Channel into 8 Ω
  • 8 Watts RMS Per Channel into 4 Ω
  • Switch-Selectable Load Impedance on Rear Panel
  • Balanced Microphone Input on XLR
  • Unbalanced Line Inputs on RCA Jacks
  • Switch-Selectable Phantom on Mic Input
  • Bass and Treble Tone Control Equalization
  • Integral Overload Limiter with LED Indicator
  • Limiter Controls Overloads from Clipping

Advantages:

  • Limiter Produces Output Level Comparable to Higher Power Amps
  • Mono Mode Switch Sums Left and Right Inputs

SPECIFICATIONS:

Input:                                                                   > 10 kΩ, -10 dBV nominal on RCA jacks,
                                                                            -13 dBV Min. (for 10 W out), +22 dBV max.

Gain:                                                                    Off to 32 dB

Outputs (2):                                                          Left and Right, 10 Watts RMS into 8 Ω per channel or
                                                                            8 Watts RMS into 4 Ω per channel,
                                                                            switchΩselectable output impedance

Frequency Response:                                         35 Hz to 20 kHz (±1.5 dB, 10 Watts)

THD+N:                                                               < 0.25%

Crosstalk:                                                            < -68 dB (1 kHz)

Noise:                                                                  < -70 dB (below 10 Watts)

24 Vdc power supply current:                               160 mA (idle), 1000 mA (max.)

Case dimensions:                                                 5.75” (14.6 cm)W x 5” (12.7 cm)D

Mounting size:                                                      1/3 rack width

Package Type:                                                     Cardboard Box

Package Dimensions:                                           9.5 x 7 x 2.25 in.

Shipping Weight:                                                  1.365 lbs.

WEEE weight:                                                       0.945 lbs.

Tariff code:                                                            8518.50.0000