Grip Supplies

Specially designed tape for the Entertainment, Visual Arts, Stage and Motion Picture Industry, this tape will lift easily and will not leave a resi...

Basic 3" spring clip with hundreds of uses in the studio and on location.

Wall plates are a great way to place a light head or any other accessory almost anywhere. Clamp or screw them (using the pre-drilled holes) to most...

This coupler can be used to mount lights and other accessories on pipe girds up to 2” diameter and creates an extremely strong mount point. Coupler...

These screw clamps have stainless steel locking threads for strength and durability. The clamps also have 1/4x20 and 3/8” female mounting points. T...

3” Spring clamp with 1 1/2” pipe clamp right angle to clamp.  The 3” jaws have rubber protective covers and will open to 2”.  The 3” jaws have rubb...

3” Spring Clamp with 5/8” stud and ¼” x 20 male thread.  The 3” jaws have rubber protective covers and will open to 2”.

Clapperboards have been essential to filmmaking, supplying production information including the all important "SCENE" and "TAKE" numbers.  The audi...

This pole clamp is used on lighting grids and railings to mount accessories. The attached 2 ½ “ grip head holds grip arms, studs for light mounting...

Wall plates are a great way to place a light head or any other accessory almost anywhere. Clamp or screw them (using the pre-drilled holes) to most...

This 22” Flex arm has a 13mm diameter with brass studs on each end. One end has a 5/8” Hex stud with a female threaded 3/8” female mount. The other...

This Super Clamp with a Multi Clamp attached gives you the option of attaching many useful accessories to your clamp. By using the attached Multi c...

3” Spring Clamp with 5/8” stud and ¼” x 20 male thread.  The 3” jaws have rubber protective covers and will open to 2”.

This 2” wide padded Jaw clamp can be attached to beams, tables, pipes, etc. Each Jaw Clamp includes a 5/8” stud to mount accessories. The bold thre...

Wall plates are a great way to place a light head or any other accessory almost anywhere. Clamp or screw them (using the pre-drilled holes) to most...

This Steel Male ¼ x 20 threaded and Hex stud fits into Superclamps to give you additional mounting options for your accessories. 

Q SERIES 15 ft. LIGHT STAND - 5 SECTION ¼ Turn Quick Lock System Opens to 15 Ft 42 Inches Closed Air Cushioned ¼ x 20 Threaded Stud on 5/8 Inch ...

Sliding Leg for Uneven Surfaces 40 Inch Main Section w/ 2 Risers Minimum Height 53"/10 Ft Maximum Height Grip Head with 40 Inch Stainless Steel Ar...

5/8"-27 MICROPHONE TO 3/8"-16 MALE THREAD ADAPTER

5/8"-27 MICROPHONE TO 1/4"-20 MALE THREAD ADAPTER

All-metal ball heads are strong and sturdy. Features a 1/4x20 threaded top, accessory shoe mount, and a 1/4x20 threaded female mount to allow mount...

All-metal ball heads are strong and sturdy. Features a 1/4x20 threaded top, accessory shoe mount, and a 1/4x20 threaded female mount to allow mount...

All-metal ball heads are strong and sturdy. Features a 1/4x20 threaded top, accessory shoe mount, and a 1/4x20 threaded female mount to allow mount...

Pro grade metal friction arm extra large adjustment knob

Professional Swiveling "C" Clamp Grip Adapter

Heavy Duty T Extension Arm. Our all metal, heavy-duty T-Extension Arm is extremely handy for mounting all types of photo and video accessories.  Ca...

Heavy Duty T Extension Arm. Our all metal, heavy-duty T-Extension Arm is extremely handy for mounting all types of photo and video accessories.  Ca...

Special clamp with pin designed to hold foamcore material

Includes one 12 inches long extension bar Allows Extra Attachments to Your Camera or Rig Works with any accessory which uses a standard accessory ...

Includes 8 inches long extension bar Allows Extra Attachments to Your Camera or Rig Works with any accessory which uses a standard accessory shoe ...

Includes one 6 inches long extension bar Allows Extra Attachments to Your Camera or Rig Works with any accessory which uses a standard accessory s...

Three Hook Set for Paper Drive Set 2 - Super clamps for ease of mounting to pipes, stands, etc.

Steel safety cable is 41” long and 5mm thick. Its load capacity is 88 lb. (40 kg) and includes a carabiner type clip to secure overhead fixtures to...

Steel safety cable is 32” long and 3mm thick. Its load capacity is 44 lb. (20 kg) and includes a carabiner type clip to secure overhead fixtures to...

Steel safety cable is 32” long and 1.5mm thick. Its load capacity is 22 lb. (10 kg) and includes a carabiner type clip to secure overhead fixtures ...

Steel safety cable is 18” long and 1.5 mm thick. Its load capacity is 22 lbs (10 kg) and includes a carabiner type clip to secure overhead fixtures...

The Baby Drop Down mounts on a 5/8” stud or on a stand with a baby pin and gives you more freedom in directing and placing your lights and accessor...

This is a parallel twin coupler that is used to hold 2 sections of up to 2” pipe together. Use these couplers when assembling light grids and rails.

Couplers like this are used to mount lights and other accessories on pipe grids and railings. These couplers can be used on up to 2” pipes and crea...

Couplers like this are used to mount lights and other accessories on pipe grids and railings. These couplers can be used on up to 2” pipes and crea...

Mount this extension bar into any super clamp and it provides a 5/8” stud to mount lights or other accessories. The extended mounting allows more c...

Not to be confused with low cost version, this is super-strong professional quality clamp designed for stage, film, & broadcast production.  Co...

Not to be confused with low cost version, this is super-strong professional quality clamp designed for stage, film, & broadcast production.  Co...

Not to be confused with low cost version, this is super-strong professional quality clamp designed for stage, film, & broadcast production.  Co...

This coupler can be used on up to mount lights and other accessories on pipe girds up to 2” diameter and creates an extremely strong mount point. C...