GTX Grip

Basic 3" spring clip with hundreds of uses in the studio and on location.

Wall plates are a great way to place a light head or any other accessory almost anywhere. Clamp or screw them (using the pre-drilled holes) to most...

This coupler can be used to mount lights and other accessories on pipe girds up to 2” diameter and creates an extremely strong mount point. Coupler...

These screw clamps have stainless steel locking threads for strength and durability. The clamps also have 1/4x20 and 3/8” female mounting points. T...

3” Spring clamp with 1 1/2” pipe clamp right angle to clamp.  The 3” jaws have rubber protective covers and will open to 2”.  The 3” jaws have rubb...

3” Spring Clamp with 5/8” stud and ¼” x 20 male thread.  The 3” jaws have rubber protective covers and will open to 2”.

This pole clamp is used on lighting grids and railings to mount accessories. The attached 2 ½ “ grip head holds grip arms, studs for light mounting...

Wall plates are a great way to place a light head or any other accessory almost anywhere. Clamp or screw them (using the pre-drilled holes) to most...

This Super Clamp with a Multi Clamp attached gives you the option of attaching many useful accessories to your clamp. By using the attached Multi c...

Wall plates are a great way to place a light head or any other accessory almost anywhere. Clamp or screw them (using the pre-drilled holes) to most...

3” Spring Clamp with 5/8” stud and ¼” x 20 male thread.  The 3” jaws have rubber protective covers and will open to 2”.

This 22” Flex arm has a 13mm diameter with brass studs on each end. One end has a 5/8” Hex stud with a female threaded 3/8” female mount. The other...

This 2” wide padded Jaw clamp can be attached to beams, tables, pipes, etc. Each Jaw Clamp includes a 5/8” stud to mount accessories. The bold thre...

Not to be confused with low cost version, this is super-strong professional quality clamp designed for stage, film, & broadcast production.  No...

Professional Swiveling "C" Clamp Grip Adapter

Special clamp with pin designed to hold foamcore material

Three Hook Set for Paper Drive Set 2 - Super clamps for ease of mounting to pipes, stands, etc.

Steel safety cable is 41” long and 5mm thick. Its load capacity is 88 lb. (40 kg) and includes a carabiner type clip to secure overhead fixtures to...

Steel safety cable is 32” long and 3mm thick. Its load capacity is 44 lb. (20 kg) and includes a carabiner type clip to secure overhead fixtures to...

Steel safety cable is 32” long and 1.5mm thick. Its load capacity is 22 lb. (10 kg) and includes a carabiner type clip to secure overhead fixtures ...

Steel safety cable is 18” long and 1.5 mm thick. Its load capacity is 22 lbs (10 kg) and includes a carabiner type clip to secure overhead fixtures...

The Baby Drop Down mounts on a 5/8” stud or on a stand with a baby pin and gives you more freedom in directing and placing your lights and accessor...

This is a parallel twin coupler that is used to hold 2 sections of up to 2” pipe together. Use these couplers when assembling light grids and rails.